Customer Service
22274775
BISON Montagekit Super Strength Tube Card 125 gram
BISON Montagekit Super Strength Tube Card 125 gram
Very high final bond strength
Can be used internally and externally
Easy to apply
Suitable for joining non-porous materials together
Universally applicable
Suitable for uneven surfaces
Water-resistant & Temperature resistant
Instruction to Use:
Depending on the weight of the material, apply the adhesive evenly in vertical stripes or dots at intervals of between 20 and 40 cm. Always apply adhesive to the corners and along the edges. Assemble materials with a pushing movement and press or knock firmly together. Correction is still possible.
With heavy materials, materials under stress, or two non-porous materials, apply the power bonding method. Mount material, press and immediately loosen. Let dry for 5 minutes, assemble in the same place and press firmly or hammer. Adjustment is not possible. For heavy materials, fastenings or supports may be required.
Storage conditions:
Store in a dry, cool and frost-free place.
Technical specifications
Other specifications
Warranty
months
Length
cm
Width
cm
Height
cm
Weight
kg
Information on technical characteristics, the delivery set, compatibility, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
Related Products
-
BISON Kit All Purpose Contact Adhesive 140 mL
Bonds immediately
Super-strong
Suitable for materials under stress
Universal
Liquid
Moisture and frost resistantSimple to use
Resistant to temperatures between -40°C and +70°C
Instruction to Use:
Parts must be clean, dry and free of grease. Coat both substrates completely. Allow drying for a minimum of 10-40 minutes. In case of porous materials, apply a second coat and let dry. Then join parts and roll or tap firmly (with a rubber mallet).
...
Availability: In Stock
1.500 KWD
-
BISON High Temp Fire Place Sealant Cartridge Black 1250 Deg
Heat resistant up to 1250º
Forms a tough seam
Fire-proof sealing
Instruction to Use :
Slightly moisten the joint with water before applying. Inject the sealant evenly into the joint and tool immediately with a wet putty knife. Allow drying for at least 24 hours. Then heat gently until the sealant has cured. For exhaust systems, first apply a layer of sealant, press in a piece of fiberglass cloth, and cover it again with sea...
Availability: Out Of Stock
2.500 KWD
-
BISON Plastic Blister 25 mL
Colorless
Solid
Waterproof
Instruction to Use:
Not to be applied at temperatures below +5°C.
Apply a thin layer of adhesive and join parts almost directly, in any case, while glue layer is still moist. Remove excess glue immediately.
Storage conditions:
Store in a dry, cool and frost-free place.
...
Availability: In Stock
1.250 KWD
-
BISON Car Mirror Blister 2 mL
Fast & Waterproof
Vibration-proof
Instruction to Use:
Do not use at temperatures below +15ºC. At lower temperatures, heat inside of car (windscreen)
Mark intended position of mirror on outside of windscreen. Attention: due to tension on the windscreen, this should be the exact same position as before. Cut the enclosed mesh in the form and size of mirror base. Apply adhesive from syringe evenly and generously on mirror base. Press mesh cut to size into wet ad...
Availability: In Stock
1.750 KWD
-
BISON Kit Transparent 50ml
Crystal clear
Bonds immediately
Super-strong & Simple to use
Suitable for materials under stress
Moisture and frost resistant
Instruction to Use:
Apply the adhesive thinly and evenly to both surfaces using the fine-toothed adhesive spreader (1 mm) or brush. Allow both surfaces to dry for 10 to 25 minutes. As soon as the adhesive stops stringing, join parts. Adjustment is then no longer possible. Avoid entrapping of air bubbles. Firmly tap, roll or press materials.
Po...
Availability: In Stock
1.000 KWD
-
BISON Epoxy Metal Blister 24 mL
Extreme strength: up to 220 kg/cm²
Metal colored
Resistant to harsh conditions
Resistant to temperatures between -40°C and +100°C
(Sea)water resistant
Very good chemical resistance
Can be sanded, filed, drilled and painted after curing
Instructions to Use:
Press out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with a synthetic spatula until a mixture is obtained with a homogeneous color. Apply the...
Availability: In Stock
2.250 KWD
-
BISON Epoxy 5 Minutes Blister 24 mL
Extreme strength: up to 220 kg/cm²
Metal colored
Resistant to harsh conditions
Resistant to temperatures between -40°C and +100°C
(Sea)water resistant
Very good chemical resistance
Can be sanded, filed, drilled and painted after curing
Instructions to Use:
Press out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with a synthetic spatula until a mixture is obtained with a homogeneous color. Apply ...
Availability: In Stock
1.950 KWD
-
BISON Vinyl Plastic Blister 25 mL
Transparent
Waterproof
Flexible
Instruction to Use:
Not to be applied at temperatures below +10°C.
When gluing overlapping parts: Apply glue thinly to the entire surface of both sides. Let dry for 5-20 minutes. The glue should be dry to the touch. Drying time depends on the nature of materials and on temperature. Join parts and press or tap firmly. After joining, parts stick immediately! Final bond strength depends on pressure, therefore exercise as much ...
Availability: In Stock
1.500 KWD
-
BISON Epoxy Universal Blister 24 mL
Super-strong (up to 170 kg/cm²)
Resistant to temperatures between -30°C and +80°C
Water-resistant & Chemical resistant
Instructions to Use:
Press out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with a synthetic spatula until a mixture is obtained with a homogeneous color. Apply the mixture, which at room temperature (+20°C) remains tool able for about 1.5 hours, as a thin layer on one of ...
Availability: In Stock
1.850 KWD